5-7
Troubleshooting
Code
Function Condition
Light Exposure indicator
➞
Dark
No.
■■■■■■■
20 For FA-S575
a) Motor clock sensor Signal is detected.
■■
b) Bin ass'y upper/lower limit switch Bin is beyond the upper
■■
limit or beyond the lower limit.
c) Cable safety switch Cable is loose.
■■
d) Bin ass'y position sensor 2 Bin ass'y position is
■■
placed correctly.
e) Bin ass'y position sensor 1 Bin ass'y position is top Bin
■■
ass'y. (#1 bin)
f) Paper exit sensor Paper is not detected.
■■
g) Paper feed sensor Paper is not detected.
■■
For FA-S615
a) Bin lower limit switch Bin is placed less than lower
■■
limit.
b) Bin cam home position sensor Cam in home position.
■■
c) Tamper home position sensor Bar in home position.
■■
d) Transfer motor clock sensor Clock signal is detected.
■■
21 For FA-S575
a) Sorter interlock Sorter is pulled out.
■■
For FA-S615
a) Bin paper detecting sensor Paper is not detected.
■■
b) Paper detection sensor for JAM Paper is not detected.
■■
c) Stapler detection sensor Stapler is not installed.
■■
22 For FA-S280
Sorter interlock switch Sorter is pulled out.
■■
For FA-S680 (FP-7722)
a) Sorter interlock switch Sorter is installed.
■■
b) Paper transport cover open/close Cover opened.
■■
➞
To Next Page
Loading...
