5-16
(5) F8 mode copier operation adjustment
Set the copier to service mode and press Multi-Copy key “8”.
Press Print key.
Select the desired code number with Multi-Copy key.
Adjust the selected mode according with instructed procedure.
Press Clear/Stop and User Preset key to escape service mode.
▼
▼
▼
▼
Code Item Function
06 Machine error and Paper jam read a) Each time the Print key is pressed, 30 machine error
or paper jam codes stored in memory are displayed,
beginning with the code stored first.
NOTE: When stored codes more than 30, only the
most recent 30 are displayed.
07 Machine error and Paper jam code a) Press the Print key, “0” is displayed.
read (06) clear
b) Press the Print key.
16 Not used
To Next Page
Loading...
