Panasonic FP-7722

22
User Preset 1
Example: Changing Paper Size
@ The paper drawer/trays are designed to accommodate invoice, letter,
letter R, legal and ledger size paper. To change the paper size, consult
your service technician for proper instructions.
Perform following steps as shown below after any locking screws have been removed
FP-7728/7735 FP-7718/7722
14 #3 2
Press User Input the desired Select the desired
Preset key paper size paper drawer/tray *
(See page 20)
Paper Guide Pull out the desired paper
drawer/tray
() Adjust paper guide @) to paper fength
(2) Adjust paper guide (©) to paper width
Squeeze the stopper to move the
paper guide © to the desired paper
size
Change the paper size indicator
Take out and re-insert the indicator so
the correct paper size 1s shown
(Invoice size is on the back side)
Size Indicator
NOTE * If the paper drawer Is not installed or is not inserted completely, the paper size
indication will not appear