Panasonic FP-7722 - Precautions; Handling Precautions; Toner and Paper Storage; Ventilation Requirements

Precautions
@ Do not look directly at exposure lamp when
copying
@ Do not turn the power switch off or open the front
panel during copying
@ Do not drop paper clips or other metal objects into
the copier
M@ Store toner, developer and paper in cool areas
with low humidity
@ High quality paper of 16 Ibs - 24 lbs (15 — 30 Ibs
via sheet bypass) may be used
@ For optimum performance, it is recommended that
only Panasonic Brand supplies be used tn the
copier
Ventilation
@ The copier should be installed in a well-ventilated
area, to minimize the ozone density tn the air
@ The FP-7718/7722/7728/7735 power consumption
is 15 kW A properly wired (with ground),
dedicated, 15 A, 120 V AC outlet is required Do
not use an extension cord