Panasonic FP-7830 - Page 349

Unpacking/
Installation
6-9
Location Procedure Check
20
Attach the “Staple” label
(1) Open the platen cover (or ADF)
(2) Attach “Staple” label (A) provided
on the upper cover (rear).
(When the ADF is installed)
<FA-A888>
Attach “Staple” label (B) provided on
the main cover.
<FA-A505>
Attach “Staple” label (C) provided on
the main cover.
21
Operation check
(1) Place some paper in the stapler
position on the top bin and press
the manual staple key.
(2) Remove the paper from the bin
and check staple.
(3) When sheets of paper are not
stapled,
repeat steps (1) and (2).
A
B
C
A
B
C
A
B
C
“Staple” label (A)
“Staple” label (B)
“Staple” label (C)
<FA-A888>
<FA-A505>
<Copier upper cover, rear>