Panasonic FP-7830 - Page 77

Preventive Maintenance
4-37
3
4
(Rear side)
2) Remove the suction fan and the ozone filter to replace them with new ones.
(1)Remove the rear cover.
(2)Replace the ozone filter.
4
(Left side)
4) Replacement of the discharge lamp.
(1)Open the front cover.
(2)Turn the toner hopper 180°.
(3)Remove the 1 screw.
(4)Disconnect the harness.
(5)Remove the lamp holder.
(6)Replace the discharge lamp (Filter and 3
screws).
6
3) Replacement of the dust collecting filter
• Remove the copier rear cover.
(1)Remove the filter cover.
(2)Remove the dust collecting filter
and replace it.
5
(3)Replace the filters.
• Open the front cover.
• Remove the exit cover. (2 screws, more
if sorter-equipped).
• Remove the filter holder (1 screw).
• Replace the filters.
• Re-assemble in the reverse.
5
1
5
Ozone filters
2
3
1
2