5-9
Troubleshooting
Code
Function Condition Message display
No.
76543210
20 For FA-S575
a) Motor clock sensor Signal is detected.
b) Bin ass'y upper/lower limit switch Bin is beyond the upper
limit or beyond the lower limit.
c) Cable safety switch Cable is not loose.
d) Bin ass'y position sensor 2 Bin ass'y position is not placed
correctly.
e) Bin ass'y position sensor 1 Bin ass'y position is top Bin
ass'y. (#1 bin)
f) Paper exit sensor Paper is not detected.
g) Paper feed sensor Paper is not detected.
For FA-S615
a) Bin lower limit switch Bin is placed less than lower
limit.
b) Bin cam home position sensor Cam in home position.
c) Tamper home position Bar in home position.
sensor
d) Transfer motor clock sensor Clock signal is detected.
21 For FA-S575
a) Sorter detection switch Sorter is pulled out.
For FA-S615
a) Bin paper detecting sensor Paper is not detected.
b) Paper detection sensor for JAM Paper is not detected.
c) Stapler detection sensor Stapler is not installed.
22 For FA-S680
a) Sorter interlock switch Sorter is installed.
b) Paper transport cover open/close Cover opened.
23 For FA-S680
a) Bin home position switch Bin in home position
b) Bin cam switch Bin cam in home postion
c) Tamper home position Tamper in home position
sensor
To Next Page
Loading...
