5-12
Code Item Function
43 Key counter When CN119-6 is +24V, count up by one.
44 Not used
45 +24V output control
When signal is sent from CPU CN1-6 to LVPS CN117-5,
+24V is supplied to +24V line.
46 Lift motor 1 When CN603-1 is +24V, motor rotates,
(When duplex unit is not installed.) lifting up (together with upper limit control.)
(Except FP-7818)
47 Paper feed clutch 1 When CN610-3 is +24V, clutch operates.
(When duplex unit is not installed.)
ADU clutch
(When duplex unit is installed)
(Except FP-7818)
48 Paper feed solenoid 1 When CN610-4 is +24V, solenoid operates.
(When duplex unit is not installed.)
ADU clutch
(When duplex unit is installed)
(Except FP-7818)
49 Lift motor 2 When CN604-2 is +24V, motor rotates,
(Except FP-7818) lifting up (together with upper limit control.)
50 Paper feed clutch 2 When CN609-3 is +24V, clutch operates.
(Except FP-7818)
51 Paper feed solenoid 2 When CN609-4 is +24V, solenoid operates.
(Except FP-7818)
52 Duplex unit drive motor When CN654-3 is +24V, motor rotates to
(Storage) storage direction.
53 Duplex unit drive motor When CN654-6 is +24V, motor rotates to
(Paper feed) second paper feed direction.
54 Lift motor 1 When CN603-2 is +24V, motor rotates,
(System console upper) lifting up (together with upper limit control.)
55 Paper feed clutch 1 When CN610-3 is +24V, clutch operates.
(System console upper)
56 Paper feed solenoid 1 When CN610-4 is +24V, solenoid operates.
57 Lift motor 2 When CN604-2 is +24V, motor rotates,
(System console middle) lifting up (together with upper limit control.)
To Next Page
Loading...
