Specifications are based on HVI standard.
Unpack and carefully remove unit from carton.
Refer to the Supplied Accessories list to verify that all parts are present.
1. Do not install this ventilating fan where air temperature may exceed 40 C (104 F).
oo
2. Make sure that the electric service supply voltage is 120V, 60 Hz.
3. Follow all local electrical and safety codes, as well as the National Electrical Code (NEC) and the Occupation
Safety and Health Act (OSHA).
4. Always disconnect the power source before working on or near the fan, motor or junction box.
5. Protect the power cord from sharp edges, oil, grease, hot surfaces, chemicals or other objects.
6. Do not kink the power cord.
7. Do not install the unit where ducts are configured as shown in Fig. A.
8. Provide suction parts with proper ventilation.
9. This unit is UL listed for use over a bathtub or shower when installed in a GFCI protected branch circuit.
Hz
60
V
Air directionModel No.
FV-05VS1
FV-08VS1
Exhaust
120
(W)
Power consumption
Speed
(rpm)
4.8 (10.7)
Weight
kg
Ib.( )
Duct
diameter
(inches)
Noise
(sone)
18
3
50
759
0.8
26
3
80
887
1.4
Fig. A
Prohibition Prohibition Prohibition Prohibition
Adaptor
4.8 (10.7)
Air deliver
(cfm)
at 0.1'' WG.
To Next Page
Loading...
