Panasonic FV-08VQL3 User Manual

Ventilating Fan/Light Combination
FV-07VQL3
FV-08VQL3
FV-11VQL3
INSTALLATION
INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
Please read instructions carefully before attempting to install, operate or service the
Panasonic Ventilating Fan/Light Combination. Failure to comply with instructions could
result in personal injury and/or property damage. Please retain this booklet for future
reference.
Table of Contents
List of components
Description
Dimensions
Specifications
Unpacking
General safety Information
Installation I (Joist mounting Installation)
Installation II (Wooden header Installation)
Installation III (Between joist mounting Installation)
Installation IV (ln existing construction)
Maintenance I (Replacement of fluorescent lamp or night lamp)
Maintenance II (Cleaning)
Product Service
2
2
2-3
3
3
3-4
5-8
9
10-13
14
14
15
16
Pages

Panasonic FV-08VQL3 Specifications

General

Brand	Panasonic
Model	FV-08VQL3
Category	Fan
Language	English

Summary

Installation Instructions

General Safety Information

Temperature Limit for Ducts

Warns against installing the unit in ducts with air temperatures exceeding 104°F (40°C).

Voltage and Frequency Requirements

Emphasizes verifying the electric service supply voltage is 120V 60Hz.

Adherence to Codes

Instructs users to adhere to all local, national electrical, and safety codes.

Power Disconnection

Advises disconnecting power before performing any work on the unit.

Continued Safety Precautions

Installation Above Bathtub/Shower

States the unit's acceptability for use over a bathtub or shower with a GFCI circuit.

HVAC Ductwork Warning

Warns against installing the unit in HVAC or recirculated air ductwork.

General Installation Warnings

General warning about risks and instructions to follow for safety during installation and use.

Installation I: Joist Mounting

Disconnecting Power Connector

Step 1: Disconnect the plug connector from the receptacle prior to installation.

Attaching Adapter to Joists

Step 2: Attach the adapter to ceiling joists using long screws, ensuring level and square placement.

Securing Conduit to Junction Box

Step 3: Remove junction box cover and secure conduit to the knockout hole.

Wiring Connections

Step 4: Connect house power wires to fan wires using wire nuts and replace the junction box cover.

Installation I: Joist Mounting Continued

Wiring Diagram Overview

Illustrates the wiring connections for the fan unit, light unit, and power supply.

Electrical Code Compliance

Warning to ensure all electrical connections comply with NEC and local codes.

Installation I: Joist Mounting Assembly

Installation I: Final Connections

Light Unit Attachment

Step 11: Connect light unit connectors and attach it to the fan body using provided screws.

Installation II: Wooden Header Mount

Light Unit Connections and Mounting

Step 2: Connect light unit connectors and attach the light unit to the fan body.

Wiring and Junction Box Cover

Step 6: Connect wiring using wire nuts and replace the junction box cover.

Wiring Diagram for II

Illustrates the wiring connections for the fan unit, light unit, and power supply.

Installation III: Between Joist Mount

Installation III: Between Joist Mount Continued

Fan Body Positioning Between Joists

Step 4: Position the fan body between joists, ensuring it is level and square.

Installation III: Between Joist Mount Final Steps

Wiring Diagram Reference

Step 9: Refer to wiring diagram on page 6 for connecting house power wires.

Installation III: Between Joist Mount Lighting

Light Unit Connection and Mounting

Step 12: Connect light unit connectors and attach the light unit to the fan body with screws.

Installation IV: Existing Construction

Installation Procedure Reference

Follow the procedures described in Installation I for installing the ventilating fan.

Duct and Wiring Inspection

Inspect duct work and wiring before proceeding with installation.

Maintenance I: Lamp Replacement

Safety Warning for Maintenance

Disconnect power before working on the unit and handle lamps with care.

Maintenance II: Cleaning Procedures

Routine Maintenance Warning

Disconnect power before working on the unit; routine maintenance annually is recommended.

Product Service Information

Service by Qualified Technicians

The unit should only be serviced by qualified technicians; no customer service information is provided.