Fix the cover of switch box.
After completing the wire connection, fix the
cover of switch box by the screws. (Dust and
moisture may cause the electric leakage or fire.)
cord bushing
WIRING DIAGRAM
TROUBLESHOOTING
Situation
Solution
The unit doesn’t works when
turning on the switch.
Without air blowing.
Is the breaker in the mode off ?
Is there a power failure?
Is the filter clogged with dust (please conduct the maintenance according
to the maintenance methods for each model)
Check according to the above questions and correct the symptom. If it still doesn't work, shut off the breaker and
contact with its dealer.
To Next Page
Loading...
