Protective Film (FZ-VPFA31)
n Included accessories
• Spatula ´ 1
Description of parts
A Protective Film
B Peel-off sheet
C White tape
D Blue tape
How to apply the Protective Film
Note
• Do not bend the Protective Film. Creases may prevent the Film from being applied smoothly to the
screen, and may make the screen difficult to see.
1. Use a soft, dry cloth to remove dirt, dust, fingerprints, etc., from the screen surface.
• If the Protective Film is applied while foreign matter remains on the screen surface, air bubbles or
abrasions may result.
2. Hold the white tape of the peel-off sheet (A), and peel back about 3 cm of the sheet from the Protective
Film.
• At this time, do not touch the adhesive side (B), or leave the Film lying around, as dust or other
foreign matter might settle on it.
52 Operating Instructions - Reference Manual
Supplementary items
To Next Page
Loading...
