Panasonic FZ-B2 series - Connecting to Power and Initial Boot; System Initialization and Configuration

8
Getting Started
First-time Operation
2 Connect your computer to a power out-
let.
The battery charging starts automatically.
CAUTION
l
 DonotdisconnecttheACadaptoruntiltherst-time
operation procedure is completed.
l
 Whenusingthecomputerforthersttime,donot
connect any peripheral device except the battery pack
and AC adaptor.
l
Handling the AC adaptor

Problems such as sudden voltage drops may arise dur-
ing periods of thunder and lightning. Since this could
adversely affect your computer, an uninterruptible
power source (UPS) is highly recommended unless
running from the battery pack alone.
3 Turn on the computer.
Press the power switch until the power indicator
lights.
CAUTION
l
Do not press the power switch repeatedly or do not
hold the power switch for four seconds or longer.
l
Any changes from the default setting of the Setup Util-
ity must not be made until the First-time Operation is
completed.
4 Initializing the computer
A
When “Welcome” is displayed, touch the language
name and scroll the language list, then touch the
language you use.
B
<Only for model with wireless WAN>
When “Insert SIM card” screen is displayed, touch
[Skip].
C
When “Select Wi-Fi” screen is displayed, perform
one of the following operations.
-Ifyouwanttosetupwi-,setupwi-byfollowing
the on-screen instructions.
㪈
㪉
2
3