EasyManua.ls Logo

Panasonic FZ-G1 Series - Flash Memory Backup and Restore; Creating a System Image Backup; Restoring Flash Memory Data

Panasonic FZ-G1 Series
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
Getting Started
First-time Operation
NOTE
l
PC Information Viewer
Thiscomputerperiodicallyrecordsthemanagementinformationoftheashmemory,etc.The
maximum data volume for each record is 1024 bytes.
Thisinformationisonlyusedforestimatingthecausewhentheashmemorygoesdownby
any possibility. They are never sent to outside via network nor used for any other purpose
except for the purpose described the above.
To disable the function, add the check mark for [Disable the automatic save function for man-
agement information history] in [Hard Disk Status] of PC Information Viewer, and touch [OK].
Then follow the on-screen instructions.
(
è
Reference Manual “Checking the Computer’s Usage Status”)
l
<For MUI OS model>
In the default settings, a shortcut icon for Korean language is on the Desktop screen. You may
delete the icon if not necessary.
l
<For MUI OS model>
If the recovery partition is deleted, you cannot create Recovery Disc(s).
n
Before using wireless function
A
Display “Charm” and touch
- [Change PC Settings] - [Network] - [Airplane mode].
Set [Airplane mode] to [Off], and then;
set [Wi-Fi] to [On] (for wireless LAN).
set [Mobile broadband] to [On] (for wireless WAN).
set [GPS] to [On] (for wireless WAN).
set [Bluetooth] to [On] (for Bluetooth).
A
Touch the Wireless Switch Utility icon to show the pop-up menu.
B
Select ON for the device you want to enable.
n
To change the partition structure
You can shrink a part of an existing partition to create unallocated disk space, from which you can
create a new partition. In the default setting, you can use a single partition.
A
Touch and hold at the bottom left corner of the Desktop screen.
Touch
(Start) and touch and hold [Computer], then touch [Manage].
l
A standard user needs to enter an administrator password.
B
Touch [Disk Management].
C
Touch and hold the partition for Windows (“c” drive in the default setting), and touch [Shrink
Volume].
l
Thepartitionsizedependsonthecomputerspecications.
D
Input the size in [Enter the amount of space to shrink in MB] and touch [Shrink].
l
You cannot input a larger number than the displayed size.
l
To select [Reinstall to the OS related partitions.] in installing OS (
è
page 21),
70
GB
*1
/ 60
GB
or more is necessary for [Total size after
shrink in MB].
E
Touch and hold [Unallocated] (the shrunk space in the step
D
) and touch [New Simple
Volume].
F
Follow the on-screen instructions to make the settings, and touch [Finish].
Wait until formatting is completed.
*1
For MUI OS model, 100
GB
or more is necessary.

Other manuals for Panasonic FZ-G1 Series

Related product manuals