Panasonic FZ-G1 Series - Page 9

9
Getting Started
l
You can set the Wireless Network after the setup of Windows
is complete.

If “Get online” is displayed, select “Skip this
step”.

“Join a wireless network” screen may not ap-
pear.
l
Verify the time zone, date and time.
CAUTION
l
You can change the user name, password, image and security
setting after setup of Windows.
l
Remember your password. If you forget the password, you can-
not use Windows. Creating a password reset disk beforehand is
recommended.
l
Do not use the following words for user name: CON, PRN,
AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9, @, &,
space. In particular, if you create a user name (account name)
that includes the “@” mark, a password will be requested at
the log-on screen, even if no password has been set. If you
try to log on without entering a password, “The user name or
password is incorrect.” may be displayed and you will not be
able to
sign in / log on to Windows
(
è
page 28).
l
Use standard characters as a computer name: numbers 0
through 9, uppercase and lowercase letters from A to Z, and the
hyphen (-) character.
If the error message “The computer name is not valid” appears,
check if characters other than the above are not entered. If the
error message still remains on the display, set the key entry
mode to English (“EN”) and enter characters.
7 Create the recovery disc.
A recovery disc allows you to install OS and restore its factory
default condition, in case, for example, the recovery partition
oftheashmemoryisdamaged.Werecommendcreatinga
recovery disc before you begin using the computer.
Refer to
è
Reference Manual “Recovery Disc Creation Util-
ity” about creating the disc.