Panasonic FZ-N1 - Button Customization Options; System Reset and Data Management; Performing a Factory Data Reset

31Getting Started
The default button assignments are described below.
Some buttons can be customized using the [UserButtonManager]
app; see the Reference Manual for more information.
Factory data reset
CAUTION
• The following procedure resets all settings and erases any data
you have stored in the unit. Back up important data before
performing this procedure.
1. From the home screen, tap → [Settings] → [Backup &
reset] .
2. Tap [Factory data reset] → [RESET TABLET] → [ERASE
EVERYTHING] .
• The unit restarts when the factory data reset is complete.
• All data in the /mnt/sdcard folder will be erased. Data stored in
the SD card will not be erased.
A1 The same function as .
A2 The same function as .
A3 Displays the list of options (if available) for the
current screen.
Side buttons No function by default.
Camera
button
Press and hold to launch the camera app. When
using the camera app, press this button to take
a picture, start and stop video recording, etc.
Factory data reset