37Getting Started
3.
Make sure that the battery cover is properly sealed.
• Two red lines are painted on the inside edges of the battery
cover. If the red lines (circled in the illustration) are visible from
the side of the unit after the battery cover is closed, the cover is
not properly sealed.
4.
Close the cover latch (
A
) and lock it (
B
) by sliding the switch
(circled in the illustration) toward .
• If the red area above the latch or inside the switch is visible, the
latch is not properly closed or locked.
IMPORTANT
• Observe the following to ensure the waterproof and dustproof
performance of the unit.
– Always make sure the battery cover is securely closed and
locked.
– When closing the battery cover, make sure there is no debris
lodged in the gasket that seals the cover.
Example: left side of unit
Properly sealed Not properly sealed
A
B
To Next Page
Loading...
