72
VQT2N35
If auto focusing is difficult due to the conditions, then use manual focus.
≥ Change the mode to or .
≥ Press the iA/MANUAL button to switch to manual mode. (l 69)
1 (When MF assist function is used)
Select the menu.
2 Touch [FOCUS].
3 Touch [MF] to change to
manual focus.
≥ MF appears on the screen.
4 Adjust the focus by touching
/.
The in-focus area is displayed in blue. The
normal screen returns approximately
2 seconds after you finish bringing the
subject into focus.
≥ When [MF ASSIST] is [OFF], the blue
area is not displayed.
≥ To restore auto focus, touch [AF] in step 3
or press the iA/MANUAL button again.
≥ The blue display does not appear on the
images actually recorded.
Manual focus adjustment
: [RECORD SETUP] #
[MF ASSIST] # [ON]
F
MFMF
MF
MF
MF
IRISSH TRWB
FOCUS
To Next Page
Loading...
