78
VQT2N56
Advanced
Recording
(Advanced)
8
Recording with manual
focus
Perform focus adjustments using the multi manual ring.
If auto focusing is difficult due to the conditions, then use manual focus.
¬ Change the mode to or .
≥ Press the iA/MANUAL button or the CAMERA FUNCTION button to switch to manual
mode. (l 75)
≥ For how to perform the settings when using the viewfinder, refer to page 75.
A Rotate the multi manual ring to adjust the focus.
1 (When MF assist function is used)
Select the menu.
2 Touch [FOCUS].
3 Touch [MF] to change to
manual focus.
≥ MF appears on the screen.
4 Adjust the focus by rotating
the ring.
The in-focus area is displayed in blue. The
normal screen returns approximately
2 seconds after you finish bringing the
subject into focus.
≥ When [MF ASSIST] is [OFF], the blue
area is not displayed.
≥ To restore auto focus, touch [AF] of step 3
or press the iA/MANUAL button.
≥ Zoom operation cannot be performed
using the multi manual ring.
≥ The blue display does not appear on the
images that is actually recorded.
: [RECORD SETUP] #
[MF ASSIST] # [ON]
≥ It is possible to set from the quick
menu. (l 38)
To Next Page
Loading...
