Panasonic HTB688

8
TQBJ2019
1 Turn the main unit on or off ( 19)
2 Select the sound mode ( 20)
3 Set the surround mode ( 20)
4 Adjust the subwoofer level (  19)
5 Adjust the volume of this system ( 19)
6 Mute the sound ( 20)
7 Select the input source
A Select the HDMI (ARC) device as the
source ( 19)
B Select the Optical device as the source
( 19)
C Select the Bluetooth
®
device as the
source ( 19)
Bluetooth
®
pairing ( 18)
Disconnecting a Bluetooth
®
device ( 18)
∫ About remote control signal sensor
The remote control signal sensor is
located on the main unit.
≥ Use the remote control within the correct
operation range.
Distance: Within approx. 7 m directly in front
Angle: Approx. 30
o
left and right
Remote control
SUBWOOFER
1
5
6
7
3
2
4

∫ Before using for the first time
Remove the insulation sheet A.
∫ To replace a button-type battery
Battery type: CR2025 (Lithium battery)
≥ Set the button-type battery with its (i) mark
facing upward.


SC-HTB488_688_EGEBGN_TQBJ2019.book 8 ページ ２０１７年３月８日 水曜日 午後５時１７分