Panasonic K-STD14 - Using the Microphone

14
Rev.1.0
Using the microphone
1To turn on the microphone, press its [PWR/MUTE] button for 1 second or more.
The battery indicator of the microphone lights. To turn off the power, press the button for
2 seconds or more. The battery indicator of the microphone turns off.
Memo:
When [BAT] indicator RED Blink, the registration to a receiver is required.
After turn on receiver’s [LINK] button,
turn on Microphone
simultaneously [PWR/MUTE] button and [INT/E1] button.
( microphone power OFF state)
Important:
• While using the microphone, do not take the microphone close to the speaker.
Loud noises such as feedback may damage your hearing.
Note:
• Also read the operating instructions of the receiver (K-SRC14), and the Access point
(K-SAP14).
BATT
CHG
OWN
OTHER
LINE
PWR
MUTE
SELECT INT/E1
Battery indicator
1
[PWR/MUTE] button