Power Consumption:
Standby: Approx. 6 W
Transmission: Approx. 25 W
Reception: Approx. 200 W
Copy: Approx. 200 W
Maximum: Approx. 560 W (When the fuser unit turns on)
Power Supply:
120 V AC, 60 Hz
Memory Capacity:
Approx. 150 pages of memory transmission/reception/copy.
(Based on ITU-T No. 1 Test Chart in standard resolution.)
Laser diode properties:
Laser output: Max. 5 mW
Wave length: 760 nm—800 nm
Emission duration: Continuous
Print Speed:
10 ppm (page per minute)
Printing Resolution:
600 × 600 dpi
Compatible OS:
Windows 95/98/Me/2000
Interface:
USB/Parallel (IEEE 1284)
* Transmission speed depends upon the contents of the pages, resolution, telephone line
conditions and capability of the other party’s machine.
** Transmission speed is based upon the ITU-T No. 1 Test Chart and original mode. (Refer to ITU-
T No.1 TEST CHART().) If the capability of the other party's machine is inferior to your unit, the
transmission time may be longer.
Note:
- Any details given in these instructions are subject to change
without notice.
- The pictures and illustrations in these instructions may vary
slightly from the actual product.
Design and specifications are subject to change without notice.
10
To Next Page
Loading...
