Dial keypad
Used to print a quick reference
(see “HELP function” on the next page).
Display
panel
Used to select a resolution (p. 18).
Checks the amount of remaining film
(p. 99).
Changes from pulse to tone during dialing (p. 37).
Used as a hookswitch (p. 37).
Used to turn on/off the auto
receive mode (p. 22, 24).
Used for voice muting (p. 16).
Used to initiate fax transmission/reception and copying.
Also used to store a parameter during programming.
Used to stop an operation
or programming.
Adjusts ringer/handset/speaker volumes.
Also used as a cursor key or a selection key
(p. 13, 16, 17).
Used for the speakerphone operation (p. 16).
Used for speed dialing (p. 34, 35).
Used to initiate/exit programming.
Redials the last number dialed.
Also inserts a pause during dialing (p. 37).
Used for one-touch dialing.
Also used as character and
command keys (p. 14, 33, 34).
Used to select a
lower station
(p. 33, 34).
Used to erase recorded messages (p. 26, 44).
Used to listen to new recorded messages (p. 26, 27).
To Next Page
Loading...
