Panasonic KX-HCM280A

Operating Instructions
108
3 Camera Maintenance
3.1 Maintenance page
Maintenance
(1) Status Displays the camera settings and status (see page 109).
(2) Session Status Displays information on access to the camera (see page
109).
(3) Restart Restarts the camera (see page 110).
(4) Update Firmware Updates the camera firmware (see page 111).
(5) Save Settings Creates a configuration file (see page 114).
(6) Load Settings Loads settings from a configuration file (see page 115).
(7) Reset to Factory
Default
Resets the camera to its default settings (see page 116).
Maintenance
Session Status
Reset to Factory Default
Restart
Update Firmware
Save Settings
Load Settings
Status
(1)
(2)
(3)
(4)
(5)
(6)
(7)