Panasonic KX-HCM280A

Operating Instructions
26
1.2.6 Setting Home Position/Alarm Position/Preset Button
Registering Home Position/Alarm Position
A home position and an alarm position can be registered. When restarted, the
camera takes a home position. If the Lens Position When Triggered setting is set
(see page 93), the camera takes a alarm position after the External I/O detects a
signal. See page 119 for the External I/O.
1. Click [Program].
• [Program] switches to [Cancel].
Click [Cancel] to quit without saving
changes.
2. Pan and tilt the camera to a desired
position.
3. Zoom to the desired position.
4. Adjust the focusing if necessary.
5. Click the home position button or the
alarm position button.
6. Click [Save] to register, or click [Back]
and [Cancel] to cancel.
• If "Success!" is displayed, click
[Back].
Zoom
Focus
ProgramPreset
Scan
Pan / Tilt
∗
-+
Brightness
∗
Alarm
Alarm
Position
Pan/Tilt
Zoom
Focus
Program
Home
Position