Operating Instructions
[For assistance, please call: 1-800-272-7033] 39
Advanced
(10) Image Display Sets resolution, image quality and refresh interval of Single
Camera and Multi-Camera page, time stamp setting, and
language (see page 77).
(11) Multi-Camera
*1
Sets the camera IP address or host name, camera name on
the Multi-Camera page (maximum 12 cameras) (see page
80).
(12) Buffer/Transfer Sets image buffer or transfer by timer or alarm. (see page
82 or page 91).
(13) Operation
Time
Sets time period to display camera images (see page 104).
(14) External
Output
Sets the external output terminal of the External I/O (see
page 106).
(15) Indicator
Control
Sets indicator display (see page 107).
*1
If you change [Administrator], [General User], or [Multi-Camera Setup page] settings,
changes will not be applied to the video (Motion JPEG) viewers. Restart the camera to make
changes applied to all video viewers.
To Next Page
Loading...
