Panasonic KX-HCM280A

Operating Instructions
[For assistance, please call: 1-800-272-7033] 41
4. Click [Save] when finished.
• New settings are saved.
• When finished, the following page is displayed.
Note
The current network settings are shown on the Status page in the Maintenance
section (see page 109).
5. Click [Restart].
• The camera restarts, and the Top page is displayed.
Note
• When you do not know the camera IP address while setting [Automatic
Setup] or [DHCP Setup], you can search it by using the Setup Program
(see page 132).
DHCP Setup Static Setup
• Clicking [Cancel] takes you back to the previous page without
saving changes.