Battery recharge
Problem Cause & Solution
The monitor unit beeps
a
nd
is displayed.
R B
attery charge is low. Fully charge the battery (page 14).
The battery is not fully
charged.
R The temperature for the charging conditions is too low or too
high. Charge the battery within the specified charging condition
range (page 30).
R The battery may not be installed. Install the battery (page 14).
R The battery may be deteriorated. Please visit
http://shop.panasonic.com/support
For assistance, please visit http://shop.panasonic.com/support
29
Useful Information
HN4001_(en_en)_0508_ver.010.pdf 29 2019/05/08 16:24:09
To Next Page
Loading...
