KX-MB262CX/KX-MB772CXKX-MB262CX/KX-MB772CX
The unit consists of a LCD (Liquid crystal display), KEYs and LEDs (light-emitting diodes). They are controlled by the Gate ArrayThe unit consists of a LCD (Liquid crystal display), KEYs and LEDs (light-emitting diodes). They are controlled by the Gate Array
(IC1) on Operation board and IC300 on (IC1) on Operation board and IC300 on
The key matrix table is shown below.The key matrix table is shown below.
*LED7 should be set to KSL4. *LED7 should be set to KSL4.
"8 x 5" key matrix is executed by hardw"8 x 5" key matrix is executed by hardw
are scanning.are scanning.
SWER LED ON/OSWER LED ON/O
FF port---LED6 (IC1-FF port---LED6 (IC1-
N/OFF port---XLEDN/OFF port---XLED
E LED ON/OFF E LED ON/OFF
port---LED5 (IC1-41pin)port---LED5 (IC1-41pin)
E LED ON/OFF E LED ON/OFF
port---LED2 (IC1-36pin)port---LED2 (IC1-36pin)
GATE ARRAY ICGATE ARRAY IC