Panasonic KX-TCD430FXB

Address Default Name
Country
Setting
Type Description
0F4B 03 Config1 x D BsUiTask configuration (MSB)
Bits 1=enable 0=disable
0:
AmPmClockSettingEnabled,
1:
ClipDetectionSettingEnabled,
2: AkzMenuEnabled, disabled
3: HakzMenuEnabled, disabled
4: RussianClipSttingEnabled,
disabled
5:
SmscSendNumberSettingEnabled,
disabled
6:
SMSPabxSupportSettingEnabled,
disabled
7: ARSDisablePossible,
disabled
0F4C D7 Config2
07
D BsUiTask configuration (LSB)
Bits 1=enable 0=disable
0: FlashTime1Enabled,
enabled
1: FlashTime2Enabled,
enabled
2: FlashTime3Enabled,
enabled
3: KeyClicksEnable, disabled
4: ARSCarrierMenuEnabled,
enabled
5:
ARSIntDeletionMenuEnabled,
6:
ARSMultipleCarrierMenuEnabled,
enabled
7:
ARSMultipleAreaCodeMenuEnabled,
enabled
0F4E FF Config2 x D BsUiTask configuration 2
Bits 1=enable 0=disable
0: RingerModeMenuEnabled,
enabled
1:
CallRestrictionMenuEnabled,
2:
CancelHandsetMenuEnabled,
3: BaseToneMenusEnabled,
enabled
4: ARSMenuEnabled, enabled
5: CallCostMenuEnabled,
enabled
6: BasePINMenuEnabled,
enabled
7: DialModeMenuEnabled,
enabled
28. EEPROM LAYOUT (HANDSET)
28.1. Scope
The purpose of this section is to describe the layout of the EEPROM (IC2) for the KX-A143
Handset.
The EEPROM contains hardware, software, and user specific parameters. Some parameters are
set during production of the handset e.g. crystal oscillator adjustment at 0000..01, some are set
66