To Next PageTo Next PageWhat does “E0” displayed on my Panasonic KX-TCD210E mean?
If “E0” is displayed, your phone number is permanently withheld or you have not subscribed to the appropriate service. Consult your service provider.
How to fix a Panasonic KX-TCD210E that doesn't ring?
If your Panasonic Cordless Telephone is not ringing, it could be due to the following reasons: * The ringer volume might be turned off. Adjust the handset and the base unit ringer volume. * The night mode feature might be turned on. Turn it off.
Why is there static or sound cutting in and out on my Panasonic Cordless Telephone?
Static or sound cutting in and out can be caused by: * Interference from other electrical units. Try to locate the handset and the base unit away from other electrical appliances. * Distance from the base unit. Move closer to the base unit. * If you have DSL service, your unit may need a filter. We recommend connecting a filter (contact your DSL service provider) to the telephone line between the base unit and the telephone line jack.
What to do if my Panasonic KX-TCD210E Cordless Telephone handset will not turn on?
If your Panasonic Cordless Telephone handset will not turn on: * Make sure the batteries are installed correctly. * Fully charge the batteries. * Clean the charge contact and charge again.
Why isn't the battery icon changing when charging my Panasonic KX-TCD210E Cordless Telephone?
If the battery icon does not change when charging, try the following: * Clean the charge contact and charge again. * Ensure the AC adapter is plugged in.
What does “FD” displayed on my Panasonic KX-TCD210E mean?
If “FD” is displayed, the unit could not connect to the SMS message centre. Confirm that the correct SMS message centre numbers are stored and that SMS is turned on.
Why doesn't pressing {R} display/dial the last number dialed on my Panasonic KX-TCD210E Cordless Telephone?
If pressing {R} does not display/dial the last number dialed, the redialed number was more than 24 digits long. Redial the number manually.
Why does my Panasonic KX-TCD210E Cordless Telephone ring and stop recording when recording a greeting message?
If the unit rings and recording stops while recording a greeting message or listening to messages, a call is being received. Answer the call and try again later.
How to fix Panasonic KX-TCD210E Cordless Telephone when I cannot register a handset to a base unit?
If you cannot register a handset to a base unit: * The maximum number of base units (4) might already be registered to the handset. Cancel unused base unit registrations from the handset. * The maximum number of handsets (6) might already be registered to the base unit. Cancel unused handset registrations from the base unit. * You may have entered the wrong PIN number. If you forget your PIN, consult your nearest Panasonic service centre. * The handset and base unit may be too close to other electrical appliances. Relocate the handset and the base unit away from other electrical appliances.
Why does '7' still flash on my Panasonic Cordless Telephone after fully charging the batteries?
If '7' still flashes after fully charging the batteries: * Clean the charge contact and charge again. * It may be time to replace the batteries.
General| Type | Cordless Telephone |
|---|---|
| Number of Handsets | 1 |
| Talk Time | 10 hours |
| Standby Time | 120 hours |
| Display | LCD |
| Caller ID | Yes |
| Speakerphone | Yes |
| DECT | Yes |
| GAP compatible | Yes |
| Frequency | 1.9 GHz |
| Answering Machine | No |
| Keypad | Yes |
| Headset Jack | No |
| Range | 300 meters |
| Phonebook Capacity | 50 |
| Battery type | NiMH |
| Intercom | Yes |
