6.13. Automatic Route Selection
Different telephone carriers charge different rates for call to different areas. If you use different
telephone carriers in an effort to save costs, automatic route selection can automatically dial the
appropriate carrier code when you make calls to certain area codes according to the way you
program this feature.
To use automatic route selection, you must:
- store the carrier codes you use
- store the area codes you want to assign to a specific carrier code
- assign a carrier code to each stored area code
Contact your telephone carrier(s) for calling rates.
Example: You have assigned area code “123” to carrier code “9876”.
If you dial “123-4567”, the unit dials “9876-123-4567”.
6.13.1. Storing Carrier Codes
Store the carrier codes of the telephone carriers you use. You can store up to 5 carrier codes.
6.13.2. Storing Area Codes
Store the area codes which should be dialled using a specific carrier. You can store up to 25
area codes.
16
To Next Page
Loading...
