Panasonic KX-TCD500NZ - Page 41

41
Cordless Telephone
Handset Settings
Changing the Handset Name
Setting Auto Talk ON/OFF
• The factory preset is “Off”.
Setting the Battery Type
• The factory preset is “Ni-MH”.
Resetting the Handset Settings
Follow steps 1 to 3 on the previous page, then:
4
Select “Change H/S
Name”.
5
Edit Handset Name.
(max. 10 characters)
6
Press JOYSTICK.
Follow steps 1 to 3 on the previous page, then:
4
Select “Auto Talk”.
5
Select “On” or “Off”.
Follow steps 1 to 3 on the previous page, then:
4
Select “Battery Type”.
5
Select “Ni-Cd” or “Ni-MH”.
You can reset all of the handset settings to their initial settings.
1
Press JOYSTICK
(or move).
2
Select “ Setting
Handset”.
3
Select “Other Option”.
4
Select “Reset
Handset”.
5
Enter 4-digit Handset
PIN.
(Factory Preset 0000)
6
Select “Yes”, then
“Deleted” is displayed.
500NZ_e.book Page 41 Monday, July 7, 2003 4:19 PM