54
Multi-Unit User Operations
Copying All Items
To exit the operation, press at any time.
• When copying is completed, a beep sounds and “Copy Complete” is displayed.
After a few seconds, the display will return to the intercom call. “Copy Incomplete”
will be displayed if the receiver handset memory is full. If “Copy Failure” is
displayed on the sender handset, the receiver did not prepare for copying.
• If you move the JOYSTICK up or down before pressing JOYSTICK at step 5, all items
will not be copied. The items, from the item indicated now to the last item, are copied.
Follow steps 1 to 4 on the previous page, then:
<Handset 1: Receiver> <Handset 2: Sender>
5
Press JOYSTICK.
6
Select “Copy All Items”.
500NZ_e.book Page 54 Monday, July 7, 2003 4:19 PM
To Next Page
Loading...
