Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333 91
Telephone System
Multi-Unit User Operations
Transferring a Call to Another Registered Unit
The intercom can be used during a call to transfer an external call between registered
units.
To exit the operation, press at any time.
Example: Cordless Handset 1 transfers a call to Cordless Handset 2
• During outside line is put on hold, press on the Cordless Handset 1 to return to
the conversation between outside line and Cordless Handset 1.
• You can also answer a call by pressing , to , , or instead of
pressing (Any Key Talk).
• If you press after pressing the desired cordless handset number, a call can be
transferred to another cordless handset without speaking to another cordless
handset.
If the transferred call is not answered within 60 seconds, Cordless Handset 1 will ring
again.
• When Cordless Handset 2 answers a call transferred, press to establish a
conference call or press to complete a call transfer.
<
Cordless Handset 1> <Cordless Handset 2>
(During a call)
1
Press INTERCOM , then press the
desired cordless handset number .
2
Press TALK .
(Conversation between Cordless Handset 1 and 2)
3
Press TALK OFF .
(Conversation between outside line and
Cordless Handset 2)
&
535E_E_04.fm Page 91 Thursday, August 7, 2003 1:33 PM
To Next Page