92
Multi-Unit User Operations
To exit the operation, press at any time.
Example: Cordless Handset 1 transfers a call Base Unit
• During outside line is put on hold, press on the Cordless Handset 1 to return to
the conversation between outside line and Cordless Handset 1.
• You can also answer a call by pressing or .
• If you press after pressing the base unit number, a call can be transferred to base
unit without speaking to base unit.
If the transferred call is not answered within 60 seconds, Cordless Handset 1 will ring
again.
• When Base Unit answers a call transferred, press to establish a conference call
or press to complete a call transfer.
<Cordless Handset 1> <Base Unit>
(During a call)
1
Press INTERCOM , then press the
base unit number .
2
Lift the handset.
(Conversation between Cordless Handset 1 and Base Unit)
3
Press TALK OFF .
(Conversation between outside line and
Base Unit)
535E_E_04.fm Page 92 Wednesday, August 27, 2003 11:09 AM
To Next Page