D
Dawn BarnettSep 6, 2025
Why I cannot page the base unit on my Panasonic Cordless Telephone?
- BbenjamincampbellSep 6, 2025
If you cannot page the base unit on your Panasonic Cordless Telephone, the base unit is in use. Try again later.
To Next PageTo Next PageWhy I cannot page the base unit on my Panasonic Cordless Telephone?
If you cannot page the base unit on your Panasonic Cordless Telephone, the base unit is in use. Try again later.
Why I cannot page the handset on my Panasonic Cordless Telephone?
If you cannot page the handset on your Panasonic Cordless Telephone, the called handset may be too far from the base unit, or the called handset is in use. Try again later.
What to do if I cannot have a conversation using the headset on my Panasonic KX-TG5621?
If you cannot have a conversation using the headset on your Panasonic Cordless Telephone, make sure that an optional headset is connected properly. If “SP-phone” is displayed on the handset, press {C} to switch to the headset.
Why I cannot redial by pressing redial on my Panasonic KX-TG5621?
If you cannot redial by pressing {REDIAL} on your Panasonic Cordless Telephone, it may be because the last number dialed was more than 48 digits long. If so, the number will not be redialed correctly; dial the number manually.
What to do when my Panasonic KX-TG5621 Cordless Telephone handset starts ringing while programming?
If your Panasonic Cordless Telephone handset starts to ring while programming, a call is being received. Answer the call and start again after hanging up.
Why is there static or cutting sound on my Panasonic Cordless Telephone?
Static or sound cutting in and out on your Panasonic Cordless Telephone can be due to interference from other electrical units. Try moving the handset and the base unit away from other electrical appliances. Also, try moving closer to the base unit, raising the base unit antennas or turning on the clarity booster feature. If your unit is connected to a telephone line with DSL service, consider connecting a noise filter between the base unit and the telephone line jack.
Why does the message indicator flash on my Panasonic KX-TG5621?
The message indicator on your Panasonic Cordless Telephone flashes because new messages have been recorded. Listen to the new messages.
Why won't my Panasonic KX-TG5621 Cordless Telephone display the caller's name or number?
If your Panasonic Cordless Telephone isn't displaying the caller's name and number, it could be due to several reasons. You may not have subscribed to Caller ID service, so contact your telephone company to subscribe. If the unit is connected to additional telephone equipment, disconnect it and plug the unit directly into the wall jack. If connected to a telephone line with DSL service, use a noise filter between the base unit and the telephone line jack. The name display service may not be available in your area, so contact your telephone company for details. Other telephone equipment might be interfering, so disconnect it and try again. The caller may have requested not to send caller information, or if the call is being transferred, the caller information will not be displayed.
How to fix a Panasonic Cordless Telephone that doesn't ring?
If your Panasonic Cordless Telephone handset doesn't ring, the ringer volume may be turned off. Adjust it.
Why is the display blank on my Panasonic KX-TG5621 Cordless Telephone?
If the handset display on your Panasonic Cordless Telephone is blank: * Make sure the battery is properly installed. * Fully charge the battery.
General| Number of Handsets | 1 |
|---|---|
| Frequency | 1.9 GHz |
| Caller ID | Yes |
| Talk Time | Up to 10 hours |
| Range | Up to 1000 feet |
| Display | LCD |
| Battery Type | Ni-MH |
| Speakerphone | Yes |
| Call Waiting | Yes |
| Intercom | Yes |
| Expandable | Yes |
| Answering Machine | No |
| Backlit Display | Yes |
| Type | Cordless Phone |
| Phonebook Capacity | 50 |
