Problem Cause/solution
Caller information is not
announced.
R The handset or base unit’s ringer volume is turned off.
Adjust it (page 23, 28, 36, 38).
R When one handset is selected to ring for cellular calls,
other units do not announce caller information. To change
the selection, see page 19.
R The Talking Call Display feature is turned off. Turn it on
(page 38).
R The ring as cell mode is set to “On (without Talking
CID)”. To change the mode, see page 19.
R The number of rings for the answering system is set to “2
rings” or “Toll saver”. Select a different setting
(page 54).
R Your unit does not announce caller information if
– the base unit or 2 or more handsets are on a call.
– a headset is in use.
I cannot dial the phone number
edited in the caller list.
R The phone number you dialed might have been edited
incorrectly (for example, the long distance “1” or the area
code is missing). Edit the phone number with another
pattern (page 46).
Time on the unit has shifted. R Incorrect time information from incoming Call Display
changes the time. Set the time adjustment to
“Manual” (off) (page 37).
The 2nd caller’s information is
not displayed during an outside
call. (Visual Call Waiting
feature does not function.)
R In order to use Call Display, Call Waiting, or Visual Call
Waiting, you must first contact your service provider/
telephone company and subscribe to the desired service.
After subscribing, you may need to contact your service
provider/telephone company again to activate this specific
service, even if you already subscribed to both Call
Display and Visual Call Waiting services.
Using Bluetooth devices
Problem Cause/solution
I cannot copy phonebook
entries from a cellular phone.
R Confirm that the cellular phone supports Bluetooth
wireless technology.
R Confirm that the cellular phone supports the Phone Book
Access Profile (PBAP) or Object Push Profile (OPP)
specification.
R If the cellular phone is already connected to another
Bluetooth device such as a Bluetooth headset, turn it off
or disconnect it from the cellular phone.
R Someone is using a cellular line or headset. Try again
later.
R Turn the cellular phone off, then turn it on and try again.
R If an entry is already stored in the unit’s shared
phonebook, the entry cannot be copied even by selecting
another group.
67
Useful Information
To Next Page
Loading...
