Panasonic KX-TG7741C User Manual

Operating Instructions
Model shown is KX-TG7731.
Link-to-Cell Cellular Convergence Solution
Model No. KX-TG7731C
KX-TG7732C
KX-TG7733C
KX-TG254CSK
KX-TG7741C
KX-TG7742C
KX-TG7743C
KX-TG265CSK
KX-TG275CSK
Before initial use, see “Getting Started”
on page 11.
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save them for
future reference.
For assistance, please call 1-800-561-5505 or visit us at
www.panasonic.ca
TG7731_41C_(en-en)_1207_ver.021.1 1 2011/12/07 19:53:57

Panasonic KX-TG7741C Specifications

General

Brand	Panasonic
Model	KX-TG7741C
Type	Cordless Telephone
Answering System	Yes
Digital Answering System Recording Time	18 minutes
Speakerphone	Yes
Caller ID	Yes
DECT Technology	Yes
DECT 6.0 Technology	Yes
Expandable	Yes
Handsets Included	1
Handsets	Up to 6
Keypad on Base	Yes
Talking Caller ID	Yes
Power Failure Talk System	Yes
Ringer ID	Yes
Call Block	Yes
Talk Time	Up to 10 hours
Standby Time	Up to 5 days
Display	LCD
Frequency	1.9 GHz
Call Waiting	Yes
Intercom	Yes
Answering Machine	Yes
Battery Type	Ni-MH
Color	Black
Battery Life	Up to 5 days (standby)
Range	Up to 1000 feet

Summary

Introduction

Model Composition

Details the physical components and configurations of different product models.

Feature Differences

Compares features and capabilities across various Panasonic phone series.

Accessory Information

Lists and describes the accessories supplied with the phone unit.

Expanding Phone System

Explains how to add optional handsets to increase system capacity.

Additional Accessories

Lists optional accessories available for purchase and their purpose.

Bluetooth Devices

Outlines the use of Bluetooth cellular phones and headsets with the base unit.

Important Information

Safety and Precautions

Critical warnings and precautions for safe usage, installation, and location.

Safety Instructions and Performance

Essential safety precautions, battery guidelines, and tips for best performance and base unit placement.

Usage Environment and Care

Guidelines on operating conditions, routine care, and product disposal notices.

Compliance and Efficiency Information

Information on ENERGY STAR compliance and TIA-1083 standard.

Specifications

Provides technical details including DECT, Bluetooth, frequency, power, and operating conditions.

Getting Started

Initial Setup and Connections

Guide on initial connections, base unit setup, and charger connections.

Battery Charging and Notes

Instructions for charging handset batteries, notes on charging, and power failure considerations.

Eco Mode and Base Unit Controls

Explains the eco mode feature and identifies controls on the base unit.

Model-Specific Controls and Handset Controls

Identifies controls for specific models and details handset operations.

Display and Indicators

Explains the meaning of icons and indicators shown on the handset display.

Belt Clip Installation

Instructions on how to attach and remove the handset belt clip.

Base Unit Indicators

Explains the meaning of base unit indicators like CELL, HEADSET, and general display items.

Initial Settings and Configuration

Guides through essential initial setup steps like language, date/time, voice guidance, and dialing mode.

Link to Cell

Link to Cell Feature Overview

Explains the benefits and requirements of connecting mobile phones to the base unit.

Registering a Cellular Phone

Step-by-step instructions for pairing a Bluetooth cellular phone with the base unit.

Cellular Call Routing

How to select which unit receives cellular calls and manage ring-as-cell mode.

Auto Connection Management

Manages automatic reconnection of cellular phones to the base unit.

Manual Phone Connection and Cellular-Only Mode

Procedures for manual connection and configuring the unit for cellular line only use.

Cellular Line Selection

Determines which cellular line is used for making cellular calls.

Area Code Storage and Bluetooth PIN

How to store area codes for dialing and change the Bluetooth PIN for security.

Making/Answering Calls Using the Handset

Making Cellular and Landline Calls

Step-by-step guides for initiating outgoing calls via cellular or landline.

Answering Calls and Call Features

How to receive calls and manage features like Hold, Auto Talk, and Ringer Volume.

Call Management Features

Covers features like Mute, Flash, Call Waiting, Tone Dialing, and Clarity Booster for call handling.

Conversation Privacy and Call Transfer

Manages privacy settings and transfers cellular calls between devices.

Making/Answering Calls Using the Base Unit

Base Unit Call Operations

Instructions for making and answering cellular and landline calls using the base unit.

Base Unit Call Features

Covers speaker volume adjustment, redialing, pause function, and answering calls.

Base Unit Ringer Volume and Call Features

Adjusting base unit ringer volume and managing Hold, Mute, Flash, and Call Waiting.

Call Sharing and Privacy

Features for sharing calls and managing conversation privacy on the base unit.

Shared Phonebook

Adding and Managing Phonebook Entries

Steps for adding, editing, and organizing contacts in the shared phonebook.

Character Table and Groups

Reference for entering names and organizing contacts into groups for easier access.

Phonebook Search Methods

Explains how to find contacts by browsing, first character, query, or group.

Editing and Erasing Phonebook Entries

Procedures for modifying existing contacts and removing them from the phonebook.

Chain Dialing Feature

Feature to dial stored numbers from the phonebook during an active call.

Programming

Programmable Settings Overview

Overview of how to customize unit features through menus or command codes.

Menu Tree and Command Codes

A table detailing menu paths and codes for various programmable settings.

Bluetooth and Link to Cell Settings

Settings for managing cellular phone connections, Bluetooth devices, and phonebook transfers.

Date, Time, and Alarm Settings

Procedures for setting the current date, time, alarm functions, and time adjustments.

Initial Setting Configurations

Configuration of basic settings like ringer volume, tone, night mode, and display contrast.

Telephone Line and Language Settings

Settings for telephone line modes, flash times, language, and voice prompts.

Special Programming

Alarm and Night Mode Setup

How to set up alarms and activate night mode for undisturbed periods.

Call Blocking Features

Features to reject calls based on stored numbers or lack of caller ID.

Registering and Deregistering Units

Instructions for registering new handsets or other units to the base unit, and for deregistering them.

Call Display Service

Using Call Display Service

How to use caller ID features, view call history, and manage incoming calls.

Talking Call Display

Announces the caller's name or number audibly during incoming calls.

Ringer ID and Call Waiting Deluxe

Assigns specific ringer tones to contacts and manages a second incoming call using various options.

Caller List and Call Back Editing

Accessing call history, calling back, and editing caller information before calling.

Managing Caller List Entries

How to erase selected or all entries from the caller list and store caller info to the phonebook.

Using Bluetooth Devices

Phonebook Transfer

Transferring contacts from a compatible mobile phone to the unit's phonebook.

Bluetooth Headset for Landline Calls

How to connect and register a Bluetooth headset for hands-free landline calls.

Headset Operation and Call Sharing

Switching audio between base unit and headset, and sharing calls with the handset.

Answering System for Landline

Answering System Control and Call Screening

Instructions to turn the answering system on/off and use call screening to listen to live messages.

Greeting Messages and Message Playback

Managing greeting messages and playing back recorded messages using the base unit or handset.

Remote Operation and Message Management

Accessing and controlling the answering system remotely, editing numbers, and erasing messages.

Remote Answering System Activation and Settings

Procedure to remotely activate the system and configure settings like ring count.

Caller Recording Time and Message Alert

Setting message duration and configuring the handset notification for new messages.

Voice Mail Service for Landline

Voice Mail Access and Tone Detection

Storing Voice Mail access numbers and managing tone detection for service provider messages.

Listening to Voice Mail Messages

Instructions on how to access and listen to Voice Mail messages via the unit.

Intercom/Locator

Intercom and Handset Locator

How to make calls between units and locate misplaced handsets.

Call Transfer and Conference Calls

Procedures for transferring calls and setting up conference calls between units.

Useful Information

Wall Mounting Instructions

Step-by-step guide on how to mount the base unit to a wall securely.

Error Messages and Troubleshooting

Lists common error messages and their corresponding causes and solutions for troubleshooting.

General Use Troubleshooting

Helps resolve common problems encountered with handset operation, unit functionality, and cellular phone registration.

Settings and Battery Troubleshooting

Troubleshooting issues related to programmable settings, display language, and battery recharge.

Call and Intercom Troubleshooting

Troubleshooting problems related to making calls, intercom use, handset ringing, and cellular line connectivity.

Call Display and Bluetooth Troubleshooting

Troubleshooting issues with caller information, Bluetooth connectivity, and basic call functions.

Bluetooth and Call Display Troubleshooting

Further troubleshooting for Bluetooth headset issues and Call Display/Call Waiting functionality.

Headset and Answering System Troubleshooting

Troubleshooting problems related to headset use and the answering system not recording messages.

Remote Operation and Liquid Damage

Troubleshooting remote operation issues, Bluetooth PIN problems, and handling liquid damage.

Industry Canada Notices

Regulatory information and notices related to Industry Canada compliance and RF exposure.

Warranty

Product Information and Support

Contact details for product assistance, warranty claims, and dealer information.

Notes

For Your Future Reference