5
2 Handset:
Press {OK}, then wait until a long beep sounds.
Note:
LIf an error tone sounds, or if _ is still displayed, register the handset
according to the base unit’s operating instructions.
Display language
1
{MENU} (centre of joystick) i {#}{1}{1}{0}
2 {V}/{^}: Select the desired setting.
3 Press down the centre of the joystick to save. i {OFF}
Belt clip
Wall mounting
1
Drive the screws (not supplied) into the wall.
2 Mount the charger (A), then slide it down (B) and to the right (C)
until it is secure.
NTo attach NTo remove
25.4 mm
(1 inch)
Screws
(120 V AC, 60 Hz)
A
B
C
TGA740C(e).fm Page 5 Thursday, January 8, 2009 11:28 AM
To Next Page
Loading...
