Panasonic KX-TGB850 Series - Other Information; Specifications

7
Important Information
Notice for product disposal,
transfer, or return
● This product can store your private/
condential information. To protect your
privacy/condentiality, we recommend that
you erase information such as phonebook or
caller list entries from the memory before you
dispose of, transfer, or return the product.
Notice
Specications
● Frequency range:
1.92 GHz to 1.93 GHz
● RF transmission power:
115 mW (max.)
● Power source:
100–240 V AC, 50/60 Hz
● Rechargeable battery:
AAA (R03) Ni-MH battery (1.2 V, 550 mAh)
● Power consumption
Base unit:
Standby: 0.81 W
Maximum: 1.97 W
Charger:
Standby: 0.03 W
Maximum: 0.9 W
● Operating conditions:
0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 %
relative air humidity (dry)
– facing away from radio frequency
transmitters, such as external antennas of
mobile phone cell stations. (Avoid putting the
base unit on a bay window or near a window.)
● Coverage and voice quality depends on the
local environmental conditions.
● If the reception for a base unit location is not
satisfactory, move the base unit to another
location for better reception.
Environment
● Keep the product away from electrical noise
generating devices, such as uorescent lamps
and motors.
● The product should be kept free from excessive
smoke, dust, high temperature, and vibration.
● The product should not be exposed to direct
sunlight.
● Do not place heavy objects on top of the product.
● When you leave the product unused for a long
period of time, unplug the product from the
power outlet.
● The product should be kept away from heat
sources such as heating devices, cooking
appliances, etc. It should not be placed in
rooms where the temperature is less than
0 °C (32 °F) or greater than 40 °C (104 °F).
Damp basements should also be avoided.
● The maximum calling distance may be
shortened when the product is used in the
following places: Near obstacles such as hills,
tunnels, underground, near metal objects
such as wire fences, etc.
● Operating the product near electrical
appliances may cause interference. Move
away from the electrical appliances.
Routine care
● Wipe the outer surface of the product with
a soft moist cloth.
● Do not use benzine, thinner, or any abrasive
powder.
Other information
● The applied nameplate is located at the bottom
or rear of the product.
CAUTION: Risk of explosion if battery is
replaced by an incorrect type. Dispose of used
batteries according to the instructions.