Panasonic KX-TGEA20EX - Page 3

Setting up
Connections
Connect the AC adaptor plug to the unit until you hear a click.
Connect the AC adaptor to the power outlet.
12
Note:
R Use only the supplied Panasonic AC adaptor PNLV233CE.
R The AC adaptor must remain connected at all times. (It is normal for the adaptor
to feel warm during use.)
Battery installation/Battery charging
When the language selection is displayed after installing the batteries for the first
time, you can select your desired language.
MbN: Select your desired language. a MOKN a M
N
Important:
R Use the supplied rechargeable batteries. For replacement, we recommend using
the Panasonic rechargeable batteries noted in the base unit’s operating
instructions.
R USE ONLY rechargeable Ni-MH batteries AAA (R03) size (
1
).
R Do NOT use Alkaline/Manganese/Ni-Cd batteries.
R Confirm correct polarities (
, ).
Charge for about 7 hours.
R Confirm “Charging” is displayed (
2
).
R When the batteries are fully charged, “Fully Charged” is displayed.
3
Installation
TGEA_TGHA20EX(en)_0111_ver601.pd3 3 2017/01/11 17:46:21