– 3 –
Date and time (Handset/Base unit)
1 {MENU}(1)1
2 Enter the current month, date, and year. s {OK}
3 Enter the current hour and minute (12-hour clock format).
4 Proceed with the operation for your unit.
Handset: *: Select “AM” or “PM”. s {SAVE}
Base unit: {AM/PM}: Select “AM” or “PM”. s {SAVE}
5 Proceed with the operation for your unit.
Handset: {OFF}
Base unit: {EXIT}
Recording your greeting message of the answering system for the
landline (Handset/Base unit)
You can record your own greeting message instead of using a pre-recorded greeting message.
1 {MENU}(3)2 s {r}: “Yes” s {SELECT}
2 After a beep sounds, speak clearly about 20 cm (8 inches) away from the microphone (2 minutes max.).
3 Press {STOP} to stop recording.
4 Proceed with the operation for your unit.
Handset: {OFF}
Base unit: {EXIT}
Link to cell
You can connect your base unit and cellular phone using Bluetooth
®
wireless technology, so that you can
make or answer cellular calls using your phone system. For more details, please visit our Web site:
www.panasonic.com/link2cell
LLocate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a
cellular call, you may hear noise. For best performance, we recommend placing the cellular phone
between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
1 Cell line
2 Cell phone service providers
Trademarks
LThe Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any
use of such marks by Panasonic Corporation is under license.
LAll other trademarks identified herein are the property of their respective owners.
1
2
TGF38x(en)_QG.fm Page 3 Thursday, November 27, 2014 2:25 PM
To Next Page
Loading...
