EasyManua.ls Logo

Panasonic KX-TGF373 - User Manual

Panasonic KX-TGF373
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operating Instructions
Link-to-Cell Bluetooth Convergence Solution
Model No.
KX-TGF372
KX-TGF373
KX-TGF374
KX-TGF375
KX-TG585SK
Model shown is KX-TGF372.
Before initial use, see “Getting Started”
on page 11.
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save them for
future reference.
Consulte “Guía Rápida Española”, página 83.
For assistance, visit our Web site: www.panasonic.com/support for customers in
the U.S.A. or Puerto Rico.
Please register your product: www.panasonic.com/prodreg
TGF37x(en)_1128_ver032.pdf 1 2014/11/28 16:08:38

Table of Contents

Other manuals for Panasonic KX-TGF373

Questions and Answers

  • J
    Jaime JohnsonAug 13, 2025
    Why is my Panasonic Telephone base unit beeping?
    • K
      Katherine DoyleAug 13, 2025
      If your Panasonic Telephone is beeping, it indicates that new messages have been recorded. To stop the beeping, listen to the new messages.
  • J
    Jennifer CaseAug 16, 2025
    Why does my Panasonic KX-TGF373 handset beep and/or flash?
    • T
      Trevor BryantAug 16, 2025
      If your Panasonic Telephone handset is beeping and/or flashing, it usually means the battery charge is low. To resolve this, fully charge the batteries.
  • Y
    ysmithAug 20, 2025
    What to do if my Panasonic Cordless Telephone unit does not work?
    • T
      Tiffany ChavezAug 20, 2025
      There are several potential reasons why your Panasonic Cordless Telephone unit might not be working. First, ensure the batteries are correctly installed. Second, fully charge the batteries. Third, check all connections. Fourth, try resetting the unit by unplugging the base unit's AC adapter, then reconnecting it. Finally, the handset might not be registered to the base unit, so try registering the handset.
  • A
    Amanda HaneyAug 25, 2025
    Why I cannot pair a cellular phone to my Panasonic Cordless Telephone?
    • P
      Paula PerkinsAug 25, 2025
      You may not be able to pair a cellular phone to the Panasonic Cordless Telephone base unit due to compatibility issues. Confirm that your cellular phone supports the hands-free profile (HFP) specification. Also, ensure that the Bluetooth feature on your cellular phone is turned on. If the Bluetooth technology on your cellular phone is not functioning normally, try turning it off and on again. If your cellular phone is already connected to another Bluetooth device, turn it off or disconnect it. Some cellular phones may require you to enter the Bluetooth PIN to pair; confirm that you entered the correct PIN.
  • U
    uhunterAug 28, 2025
    What to do if my Panasonic KX-TGF373 Telephone unit does not work?
    • N
      Nichole YuAug 28, 2025
      If your Panasonic Telephone unit isn't working, try the following: 1. Ensure the batteries are correctly installed. 2. Fully charge the batteries. 3. Check all connections. 4. Unplug the base unit’s AC adaptor to reset it, then reconnect and try again. 5. Ensure the handset is registered to the base unit.
  • P
    Paul StewartSep 1, 2025
    What to do if I cannot connect a cellular phone to my Panasonic Telephone base unit?
    • A
      Alicia JohnsonSep 1, 2025
      If you cannot connect a cellular phone to the Panasonic Telephone base unit, please check the following: * Ensure that your cellular phone is turned on. * Make sure your cellular phone is within the base unit range. * Verify that your cellular phone’s Bluetooth feature is turned on. * Consider that wireless environment conditions might cause delays; try connecting manually. * Ensure the cellular phone has been paired to the base unit. * Disconnect the cellular phone from other Bluetooth devices. * Remove the registration of this phone on both your cellular phone and on the other Panasonic DECT phone.
  • B
    Bradley OlsonSep 5, 2025
    Why I cannot hear a dial tone on my Panasonic KX-TGF373 Telephone?
    • L
      Lori AllisonSep 5, 2025
      If you cannot hear a dial tone on your Panasonic Telephone, ensure that the CELL indicator lights up. Also, check that the base unit’s AC adaptor and telephone line cord are properly connected. If the issue persists, disconnect the base unit from the telephone line and connect the line to a known working telephone to determine if the problem is with the unit or your phone service.
  • M
    Megan Wood MDSep 8, 2025
    What to do if I cannot pair a cellular phone to my Panasonic Telephone?
    • J
      Jacqueline ParrishSep 8, 2025
      If you are unable to pair a cellular phone to the Panasonic Telephone base unit, it could be due to compatibility issues. Confirm that your cellular phone supports the hands-free profile (HFP) specification. Also, ensure that the Bluetooth feature of your cellular phone is turned on. Try turning off and on your cellular phone. If your cellular phone is already connected to another Bluetooth device, turn it off or disconnect it. Some cellular phones may require you to enter the Bluetooth PIN to pairing; confirm that you entered the correct PIN.

Panasonic KX-TGF373 Specifications

General IconGeneral
TypeCordless Phone
Number of Handsets3
Frequency1.9 GHz
Caller IDYes
Answering SystemYes
RangeUp to 1000 feet
BluetoothNo
Keypad on BaseYes
Answering MachineYes
DisplayLCD
Battery Life7 days standby
FeaturesCall Block

Related product manuals