– 9 –
Using a Bluetooth wireless headset (optional) for landline calls
By pairing a Bluetooth headset to the base unit, you can have a hands-free conversation wirelessly for
landline calls.
LOnly 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the
headset and 1 cellular line).
Pairing a headset to the base unit (Handset/Base unit)
1 Your headset:
Set your headset to pairing mode.
LRefer to your headset operating instructions.
2 {MENU}(621
1 Pair using the handset or base unit.
2 Paring
3 If your headset PIN is “0000”, go to step 4.
If your headset PIN is other than “0000”, press {CLEAR}, then enter your headset PIN.
LTypically, default PIN is “0000”. Refer to the headset operating instructions.
4 Press {OK}, then wait until a long beep sounds. s {OFF}/{EXIT}
LWhen is displayed on the base unit, the headset is available for use.
Operating a Bluetooth wireless headset using a landline (Base unit)
Refer to your headset operating instructions for headset operations.
NAnswering landline calls with your headset
To answer a landline call, press your headset’s button referring to your headset operating instructions.
When you finish talking, press your headset’s button referring to your headset operating instructions.
LIf you cannot hang up the call using your headset, press {s} on the base unit 2 times.
NSwitching between the base unit and your headset
You can switch between the base unit and your headset:
− during a landline call with the base unit.
− during an intercom call between the base unit and handset.
− while listening to messages recorded on the base unit answering system.
To switch to your headset:
Press {} on the base unit.
To switch to the base unit:
Lift the corded handset to talk with the corded handset.
or
Press {s} to talk with the speakerphone.
Using Bluetooth devices
2
1
TGF38x(en)_QG.fm Page 9 Thursday, November 27, 2014 2:25 PM
To Next Page
Loading...
