Panasonic KX-TGFA87C - Page 5

Setting up
Connections/Wall mounting
Connect the AC adaptor to the power outlet.
Drive the screws (
1
) (not supplied) into the wall, if necessary.
2
27.2 mm (1
1
/1
6 inches)
1
2
1
2
Note:
R T
he AC adaptor must remain connected at all times. (It is normal for the adaptor
to feel warm during use.)
R Make sure that the wall and the fixing method are strong enough to support the
weight of the unit.
Battery installation/Battery charging
When the language selection is displayed after installing the batteries for the first
t
ime, you can select your desired language.
MbN: Select the desired setting. a MSAVEN a MOFFN
Important:
R U
se the supplied rechargeable batteries. For replacement, we recommend using
the Panasonic rechargeable batteries noted in the base unit’s operating
instructions.
R USE ONLY rechargeable Ni-MH batteries AAA (R03) size (
1
).
R Do NOT use alkaline/manganese/Ni-Cd batteries.
R Confirm correct polarities ( , ).
C
harge for about 7 hours.
R Confirm “Charging” is displayed (
2
).
For assistance, visit www.panasonic.ca/english/support
5
Installation
KX-TGFA87C(en-en)_0114_ver011.pdf 5 1/17/2020 8:48:09 AM