3
1. Select "Add new Device" on the administration portal in the tab Elements/Devices.
2. Select KX-TGP600 in the Panasonic devices list.
3. A new window appears, select here your firmware version.
4.
Enter the MAC address. You will find the MAC address either on the delivery-box or on the
bottom side of the device (see example).
5. Click on save to save your entries.
6.
Connect your DECT base station to your LAN network.
The base station will now be synchronised. This can take a while and depends of the firmware
upload time.
Maintain the distances listed below between equipment in order to prevent noise,
interference or thedisconnection of a conversation. (The distance may vary depending on
the environment.)
More then 2 meter SIP-CS and office equipment such as a computer, telex, fax
machine, etc.
More then 5 meter SIP-CS and other radio device
Adding DECT mobile handsets KX-TPA60, KX-TPA65, KX-UT121, KX-UT131
To register mobile handsets to your phone system follow the steps below:
Nr. Description Picture
To Next Page
Loading...
