Page 6
4a CONNECTING ADDITIONAL CORDLESS PHONES [KX-TPA65 Desk Phone]
If you need to use a portable cordless phone with your desk phone:
• Press and hold the Handset Locator button on the base unit for ~3 seconds.
• The status indicator on the Base Unit will flash as follows:
a) Slow flashing – Red: The base unit is registering to a phone.
• Select Menu > System Settings > System Settings > Register H/S
• Select the handset you would like to register > Select OK
• The phone will display the following prompts:
a) “Executing”: Please wait till the registration process is completed.
b) “Registered”: Initial registration is completed.
• Press the Back button to return to the main screen and complete the registration process.
4b CONNECTING ADDITIONAL CORDLESS PHONES [KX-UDT131]
• Press and hold the Handset Locator button on the base unit for ~3 seconds.
• The status indicator on the Base Unit will flash as follows:
a) Slow flashing – Red: The base unit is registering to a phone.
• Select Menu > Setting Handset > System Option > Register H/S
• Select the base unit you would like to register the handset to (default: Base Unit 1) > Select
OK
• The phone will display the following prompts:
a) “Executing”: Please wait till the registration process is completed.
b) “Registered”: Initial registration is completed.
• Press the Power / Cancel button to complete the registration process.
Quick Tip
You can register a maximum of 8 phones to a base unit.