Panasonic KX-TS105B - Dialing Mode Selection; Ringer Volume Adjustment

» Settings
Dialing Mode
You can select the dialing mode by programming. If you have touch tone
service, set to "Tone". If rotary or pulse service is used, set to "Pulse".
Your phone comes from the factory set to "Tone".
Make sure that a call is not put on hold.
1
Press
(PROGRAM).
PROGRAM
eThe
MUTE
indicator
flashes.
Press
(MUTE).
Press (3).
To select “Pulse”, press (2).
or
To
select
“Tone”,
press
(1).
MUTE)
and
Indicator
Press (PROGRAM).
or A Co N
$A long beep sounds.
eThe MUTE indicator light goes out. `
eThe unit will return to the standby mode.
Ringer Volume
You can select the ringer volume to HIGH, LOW or OFF. Your phone
comes from the factory set to HIGH.
RINGER Selector:
Set to HIGH, LOW or B
OFF. OFF IGH
eWhen set to OFF, the LOW
unit wilt not ring. RINGER