Panasonic KX-TS15-W - Selecting the Dialing Mode

=
Selecting the Dialing Mode
You can select the dialing mode by programming. If you have touch tone
service, set to TONE. If rotary or pulse service is used, set to PULSE. Your
phone comes from the factory set to TONE.
1 Lift the handset.
Press [PROGRAM].
e The MUTE indicator flashes.
2
3 Press (3).
4
s
To select PULSE, press (0).
OR
To select TONE, press (1).
Press [PROGRAM].
e A beep sounds on the
handset and the MUTE
indicator light goes out.
6 When finished, replace
the handset.
TUO
ATTO
=
A
pe)
pe” | A
MUTE indicator
e To cancel during programming, replace the handset, then start from
step. 1.
e If 4 beeps sound during programming, a wrong key was pressed.
Replace the handset, then start from step 1.